CSCvb66655: Cannot Add Packet Transfer Mode (PTM) Entry for xDSL WAN on RV134W

Available Languages

Download Options

  • PDF     (93.7 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (49.5 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (67.7 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:June 19, 2017
Document ID:SMB5504

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

CSCvb66655: Cannot Add Packet Transfer Mode (PTM) Entry for xDSL WAN on RV134W

Summary

When attempting to add a DSL WAN connection on the RV134W router, an option does not exist to add Packet Transfer Mode (PTM).

Date Identified

October 10, 2016

Date Resolved

March 29, 2017

Products Affected

RV134W v1.0.0.21

Issue Description

If you want to verify the issue being described, follow the steps below:

Step 1. Log in to the web-based utility and choose Networking > WAN > WAN Configuration.

Step 2. Under the xDSL WAN table of the WAN Connection area, click the Add Row button.

Step 3. Under the DSL Settings area, the Transfer Mode is set to ATM. There is no way to configure PTM.

Resolution

This issue will be fixed in the next firmware release of the RV134W.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco